• Complied with ATX and ATX12V standard
• High efficiency and reliability
• Remote On/Off function Internal 12V DC fan included
• Noise Killer (Thermal fan speed control function)
• Low noise and ripple
• Complies with FCC part 15 subpart J class B and CISPR 22 Class B
• Output over voltage, short circuit, and over current protection
• 100% Hi-pot, ATE, and burn-in tested
• Re-settable power shut down
• Approved by UL 1950, CSA C22.2 Level 3, TUV EN60950, Nemko (CB Report)

• Temperature Range: Operating 0° C ~ +25° C on full load; storage & shipping -20° C ~ +65° C
• Humidity: 90% on operating and 95% on storage
• Dielectric Withstand: Primary to frame ground 1800V AC for 1 second
• Efficiency: 65% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
• Rise Time: Less than 20ms on all outputs
• Hold-up Time: 16.6ms minimum at 115V/60Hz; 20ms minimum at 230V/50Hz input voltage
• Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
• Leakage: Current: Less than 3.5mA
• MTBF: 100,000 hours on maximum load at +25° C degree
• Dimension: (WxHxL): 150x86x140mm/5.9”x3.4”x5.5” inches

• Input Range: 95~132/190~264V AC, Manual-select Frequency: 47~63Hz
• Input Current: 10A (RMS) @115V AC, 5A (RMS) @230VAC
• Inrush Current: 60A Max for 132V AC Cold Start

Output Characteristics