• Temperature Range: Operating 0 C~50 C; storage & shipping -20 C~65 C
• Temperature Coefficient: 0.01% / C
• Transient Response: Output voltage returns in less than 1 ms max. at a 25% load change
• Hold-up Time: 16.6ms minimum at 115V/60Hz and 20.0ms minimum at 230V/50Hz full load
• Dielectric Withstand: Input to frame ground 1800 VAC for 1 second
• Humidity: 95% RH
• Efficiency: 65% at minimum measured at normal AC main voltage and frequency with maximum load on all output
• Power Good Signal: Power on delay time 100ms to 500ms, off delay 1ms minimum
• Overload Protection: 150% Max.

Input Characteristics:

Input Range: 95-132/190-264 VAC, Switch-select

Frequency: 47-63 Hz

Input Current: 10A (RMS) at 115VAC, 5A (RMS) at 230 VAC

Inrush Current: 60A Max. for 115 VAC, 90A Max for 230 VAC.

Remote On/Off Control:

• The power supply shall accept a logic open collector level which will disable/enable all the output voltages (exclude +5V standby).
• As logic level is low/high, output voltages are to be enabled/disabled.

Output Characteristics:

* Maximum power: 250W

* +5V and +3.3V total output not exceed 175W

* When +3.3V is load to 20A, the +5V maximum load is 21.8A

* When +3.3V is load to 12.12A, the +5V maximum load is 27A

* Dimensions (wxhxl): 150 x 86 x 140 mm / 5.9'' x 3.4'' x 5.5''