Silverstone Kublai KL04 (SST-KL04-B) performance Mid tower Computer PC Case- BLACK
When the first Kublai series chassis was introduced in 2007, it had innovative storage design that was ahead of its time. For the Kublai KL04, SilverStone engineers again looked to raise the bar with a design that can accommodate four 5.25” drive bays, nine 3.5” hard drives, and up to six 2.5” SSDs. This astonishing amount of storage capacity for a mid-tower chassis is unprecedented and comes with no compromise to compatibility. Expansion cards or graphics cards up to 17 inches long can be installed without the need to remove hard drive cage and even with all hard drive bays filled, cards up to 12.8 inches can still be used. To cope with densely packed hard drive bays, repeated thermal tests and revisions were made to come up with an airflow layout that is capable of handling all hard drives installed without negatively affecting the rest of the system. The right front positioning of the intake fans also helps to divert noise from leaking out directly to the front of the chassis. For 2.5” SSD or HDD mountings, the KL04 has specially designed cages that can be mounted in two locations depending on user needs. If you are looking for a chassis with server-like room for expansion but only limited footprint for a mid-tower, the KL04 is the choice.
Remarks:
*1 – If bottom fan or 2.5” SSD is installed, the maximum depth for PSU is 180mm (or 160mm with extra cabling room), otherwise there are no depth limitations. *2 – If hard drive is installed in front of the cards, the length limitation is 12.8 inches.
KL04 Manual
KL04 Flyer
Equip your KL04 with AP121 for amazing cooling performance.
SST-FP37 Premium 3.5 front bay card reader with SDXC and USB 3.0 support
Use FP55 to support one 3.5 and two 2.5 devices in a 5.25 drive bay.
SST-CP06 Four-in-one SATA power connectors with power stabilizing capacitors
SST-CP08 SATA III cable with non-scratch locking mechanism and 90° connector