RJ Tech (RJ-4000SB, RJ-4000-SB) Home Theater Surround Speaker Plus A Subwoofer With A Housed Amplifier
The RJ-4000sb SoundBar™ surround system consists of two units: a speaker with 9 drivers (small speakers) plus a subwoofer with a housed amplifier. The speaker is about 32” width which make it an ideal compliment to 32”~37” size range flat panel television. It is light and can easily hang above or below a flat panel television unit. The system delivers over 1200 watts of power through 4 front speakers, 3 center speakers, 2 surround speakers, and one subwoofer.
RJ Technology’s SoundBar™ family of surround speakers delivers 5.1 channel surround sound in a new innovative way. SoundBar™ is easy to setup and yet delivers immersive audio quality without the obtrusive clutter of cables and multiple speakers.
Licensed by SRS Labs’s TruSurround XT virtualization technology, SoundBar™ is a system that contains multiple speakers strategically placed within to provide multi-channel surround sound. The technology is based on HRTF, from the research of human perception of sound direction. The SoundBar™ does not solely depend on the surrounding walls and objects to bounce the sound wave. It uses a patented combination of digital signal processing from the front and rear channels plus acoustical geometry that complements the spacing between the ears to produce surround sound without rear mounted speakers.
Designed to be a front mounted unit under/over a flat panel TV, the SoundBar™ is a great solution for home entertainment systems through its delivery of rich, immersive audio without the obtrusive, cable laden clutter of multi-speaker traditional surround sound systems. Slim and attractive, both speaker and subwoofer units are made of luxurious black and white lacquer. Behind the subwoofer box, there are 2 optical connectors, one digital coaxial and one analog 2.0 channel. With a built in amplifier and DTS/Dolby AC3 dual decoder, set up is a breeze. The unit can power additional speakers (front right, front left, surround right, surround left, center) through its speaker terminal strip
Listeners can independently adjust the volume of the directional speakers plus that of the subwoofer to the desired level via the remote control. It can also easily select the source of the audio from any of the inputs. Additional pre-programmed effects are conveniently accessible from the remote. Each of the pre-program effects will give the listener the corresponding surround effect as if he/she is in a stadium, pop concert, music hall, movie theater and regular stereo.
Accessories include one CD and coaxial wire, two optical cables, and a remote control.
Power input: AC 110-120, 50/60Hz
Total output power: 1200 Watts (popo)
Total RMS: 115W (Sub 60W + Satellite 55W)
Speakers:
Subwoofer: 6.5”x1
Center: 3”x2 + 1.5”x1
Front R/L: 3”x2 + 1.5”x2
Surround R/L: 3”x2
Impedance: 8 ohms + 4 ohms
Frequency response: 20Hz-20KHz
Separation: dB45
Signal to Noise ratio: ≥75dB
Distortion: 0.1%@1W
Input Connectors: 2 digital optical,1 digital coaxial, 1 analog AUX.
Dimensions: SoundBar: 800mm(W) x 156mm (H) x 100mm (D) or 31.50”W x 6.14”H x 3.94”D
Subwoofer: 400mm (w) x 326mm (H) x 196mm (D) or 15.75”W x 12.83”H x 7.72”D
Gross Weight: SoundBar: 13 LB
Subwoofer: 25 LB