Lian Li (PC-A20B, PC-A20-B) Aluminum Super Mid Tower Computer PC Case- BLACK
Features:
Minimalism style, with 3mm thick alumium extrusion front panel with hair-line brushing and anodized finishing, vent holes covered with painted steel mesh.
PC-A20 has modularized hardware design, the HDD cages, can be remove, or modify to suit user's need.
The power and reset button has blue LED backlighted feature.
PC-A20 also features multi-heat zone design, ensure the best thermal & silent solution.
Silent Performace:
To keep the system cool, and also running silent at the same time. PC-A20 using large sizes fans which running in low RPM, but still have enough air flow.
There are anti-vibration kits on the chassis to reduce the vibration noise.
There is a three-speed fan controller in the front, user can use it to adjust the fan speed to suit their needs.140mm fan speed 800-980-1180 RPM; 12mm fan speed 1020-1240-1500RPM; Factory set to mid speed. user can adjust to get the best balance between silent and cooling.
The fan also mounted with rubber ring to reduce the vibration noise
There are anti-vibration spring fited inthe 5.25 rack to reduce the noise which cause by the vibration.
Lian Li patented anti-vibration HDD mounting design, it is easy to use, simple use the thumb screws to secure the rubber ring to the HDD, and slide the HDD to the special made HDD cage, and the rubber ring will absorb the vibration and reduce the noise.
There are noise damper panel inside the door, behind the vent openning. Allow the air to pass through, and reduce the noise level pass through the damper panel.
Creative Thermal Solutions:
PC-A20 has two heat zones, one zone for motherboard, graphics card and optical drives, and one zone for 3.5” HDD and power supply unit. To separate the heat sources for better thermal solution.
PC-A20 has fitted a 140mm intake fan, The fan can output high air flow volume with lower RPM to push the cold air through the HDD rack. It can be adjust by the three-speed fan speed controller, factory setting to Middle (980RPM), user can adjust the fan speed to suit.。(140mm fan speed @800-980-1200RPM)
PC-A20 has fitted a 120mm fan on the graphics card holder to cool the memory and north bridge chip set. Fan speed can be adjust by the three-speed fan controller,factory setting to middle (1240RPM), user can adjust the fan speed to suit.
Power supply unit located at the lower part of the chassis, and it can get the cool air from the bottom of the chassis. Ideal for keep power supply in lower temperature to keep in best output performance, also keep the components cold to extend the life cycle.
There is a panel between HDD and PSU sections, there is space for a 120mm fan for improve air flow.
There are opening for water tubes on rear of the top cover. Ideal for user who would like to fit liquid cooling system into PC-A20.
User Frinedly:
Motherboard tray is removable, user don't need to work inside the small space.
There are openning above the motherboard tray, allow user to hide the cable behind the motherboard tray.
PC-20 has fitted with a server grade graphics card pillar, to hold the heavy graphics card in place.
The 5.25 rack has fitted tool-less ODD mounting kit, simply slide in the ODD drive into the 5.25 rack, and it will lock it in place, there are extra screw mounting points for extra security.
Modularized HDD cages, can be removed easily by un-secure a spring loaded thumb screw, All the cages and base can removable totally for liquid cooling project.
The HDD cage can be rotate 180 degree for cable management.
No metter of where you want to place your chassis.PC-A20's front panel can switch the open direction, allow chassis to fit in different working environment.
ALll the internal openings has equipped with plastic protector to avoid cutting user's hand or cables.
Dual power supply units space, user can remove the 2-bay HDD cage, and fit the power supply stand on to the chassis, and it can support 200mm long power supply units. ( when user using power supply which longer than 200mm, they can remove the panel between Power supply / HDD section for more space.
Multi-media ports’ connectors follow international specification standard, with one connector for easy installation.
Multi-media I/O ports located on top of the case, easy for user to access, and it comes a dust-free cover
Back to the top
