Lian Li (PC-9F-B, PC-9FB, PC-9-FB) All Aluminum Mid Tower Computer PC Case- BLACK, Supports CrossfireX™ and 3-way SLI™, USB 3.0 Ports

Lian Li (PC-9F-B) All Aluminum Mid Tower Computer PC Case- BLACK, Supports CrossfireX™ and 3-way SLI™, USB 3.0 Ports

The new internal layout has the motherboard on top of the power supply unit, which allows for easier access to the motherboard as well as more room above, thus larger CPU coolers can be used. The power supply unit at the button of the case is cooled with fresh cool air directly from the outside of the case, instead of pre-heated air from within. This will bring down the core temperatures and extend the lifespan of the PSU significantly.
The PC-9F is a Mid-tower case, which is ideal for the latest graphics cards in combination with the best thermal dynamics. All the internal installation can be done without tools, and is easily adjustable to optimize your hardware setup. Especially in the advent of adding in new graphics cards, equipped with 8 PCI slots, can hold three or more graphics cards, supports CrossfireX™ and 3-way SLI™.
The hardware installation with PC-9F is very easy and simple. The front panel is detachable and they can be removed without tools.

Silent Performace:

Lian Li uses the best “Made in Taiwan” high quality aluminum panel for all Lian Li chassis. The solid main chassis was folded with 1.5mm thick aluminum sheeting to make a more sturdy structure which has less vibration. The removable front panel is joined with specialized plastic kits that prevent the metal parts from touching each other, ultimately reducing noise created by fans and HDD vibration.
The new 5.25” bay tool-less mounting incorporates a mounting bar equipped with rubber padding. After closing the mounting bar, the rubber pad pushes and holds the 5.25” device in position to both secure and absorb vibration from the device.
Lian Li designers spent months to upgrade Lian Li’s HDD cage; the new HDD cage using special Thumb Screws with rubber suspension. no tool required, simply secure the anti-vibration rubber ring to the HDD, and slide the HDD into the cage and there is a gate to secure the HDDs
The Power Supply has rubber pads for both insulation and support. Also secure the PSU without scratching the painted surface.

Creative Thermal Solutions:

The PC-9F is equipped with large cooling fans, with low RPM, which still provide enough air flow to cool down the hardware adequately. The front two 120mm intakes fan.
The rear 120mm exhaust fan just next to the CPU, it can remove the hot air out fast and silently.
There are vents on the PCI slots, provids extra cooling to graphics card.
The power supply unit is at the bottom of the case. It can draw in cold air directly through the vent below the power supply unit. This cooler, fresh air will keep your PSU components more cool and stable and thus extend the PSU lifecycle.
PC-9F supports liquid cooling system, the two holes at the rear of the case allows water tubes to pass through, and the rubber cover can protect the tubes away from cutting.
There is a special quadrate opening of motherboard tray, user can easily switch the cpu's radiator without remove motherboard.

User Frinedly:

Multi-media port connectors follow international specification standards, with one connector for easy installation. New USB3.0 ports, e-SATA, Audio supports HD Audio. The dual design is for better compatibility options. All I/O ports on the top cover, allow for easy access, there is also a dust-free cover to protect these connectors.
All new tool-less design from Lian Li aluminum chassis. To do this required a great many innovative patents to be filed worldwide. The ideas will make installing and maintenance much easier. For example when installing the 5.25” optical drive, just slide the drive into the 5.25” bay, and close the mounting bar to secure the optical drive, as simple as that.
There is a modular HDD cage, simple un-do the thumb screw, and silde the HDD cage out, mount the HDD with anti-vibration kit. .
There is a patented cable management clamp for cables to pass through, allow uesr convenient manage the cables.
Aluminum M/B Thumb Screw, user can easily screwed motherboard without tools.

There are openings on the panel, allow user to manage the cables.

There is an air filter at the base of the case to stop dust from entering the case. The filter is washable. The vents are specially designed to retard heat and fire crossover should a short circuit cause sparks and excessive heat within your system. This feature is designed to prevent the problem from spreading outside your case should the unlikely event occur with your components.

Anti-vibration thumb screw for HDD, using special thumb screws with rubber suspension. no tool required, simply secure the anti-vibration rubber ring to the HDD.

There ia a fan hole on the top, user can easily remove the screws, put an intake 140mm fan on it for better thermal performance.

There is a PCI Bracket allow user to connect USB3.0 cable to Motherboard.