Lian Li (PC-A7010-B, PC-A7010B) Aluminum Full Tower Computer PC Case- BLACK

It not able luxury, or costliness, PC-A7010 equipped SATA HDD Raid HDD cage to help your life easier. You can have more time to enjoy your life, no more working with wire. It also features Raid function. ( Still need the support from the M/B or SATA Raid Card chipset)
PC-A7010 has equipped four 120mm cooling fans in the fornt of the chassis, there are two fans intake the cool air into the case, and two fans next to the HDD cage to draw the air to improve the air flow. The Fan not only cool the HDD down, it also help the motherboard's North & South bridge chipset, and the graphics card.
Huge internal space fits E-ATX motherboard, and graphics card, which can up to 345mm long, and there are room for 10 hard drivers, there are space for dual power supply units. There are total of 6 x 12cm cooling fans to cool the system down, and a lot of internal space for liquid cooling system. It is an ideal for gamer and pro user!

Silent Performace:

PC-A7010 equipped total six fans to keep the system cool. To reduce the nosie, PC-A7010 has fitted a three-speed fan speed controller, which can adjust six fans, speed from 1020 to 1240 to 1500 RPM. Factory setting to Middle (1240RPM). User can adjust the fan speed to get the best ballance of silent and cooling.
There two 120mm intake fans in the front of the case, two in the middle, and two at the rear. To use large size fan, for inputting large amount of air volume while at the low speed. It can be adjusted by a three-speed fan controller, factory setting at middle (1240RPM). User can adjust it to suit.
PC-A7010 has equipped anti-vibration system to the HDD cage at the rear of the case, by using rubber ring to hold the HDD in the HDD cage, to reduce the noise which cause by the vibration.
All the moving parts has also equipped anti-vibration kit to reduce the vibration, and lower the noise.

Creative Thermal Solutions:

PC-A7010 is using Thermal Tunnel solution, the two 120mm fans in the front input cold air into the system, the two 120mm fans and the PSU's fan draw the hot air out as a heat circulation . To have extra cooling performance to the motherboard and graphics card, there are two 120mm fans behind the HDD cage to improve the air flow to cool the system down.
There are two 120mm intake fan on PC-A7010, The fan can output high air flow volume with lower RPM to push the cold air through the HDD rack. It connected to a three-speed controller, factory setting at middle(1240RPM), user can adjust it to suit.
The case front intake fans has equipped air filter, to stop dust entering the chassis. These air filter were washable, envirnoment friendly.
There is a 120mm exhaust fan at the rear to draw the hot air out, and improve the air flow inside the chassis. It can be controlled by a fan speed controller, factory setting to Middle (1240RPM), user can adjsut it to suit.
The HDD cage also fitted a 120mm exhaust fan to draw the hot air out, to keep the HDD cold, and remove the hot air from the system.It can be controlled by a fan speed controller, factory setting to Middle (1240RPM), user can adjsut it to suit.
There are alot of M/B using heat pipe solution, PC-A7010 can 100% support them, for extra cooling, there are openning on the M/B tray, allow air to cool the rear of the M/B.
There is a smart way to control the fan speed. PC-A7010 equipped a three-speed fan controller, user can easy adjust the fan speed of six fans to suit their need, when there is not hot inside the system, switch it to low speed, to make it silent and to extend fan's life cycle. Factory setting to Middle (1240RPM), user can adjust the fan speed from 1020~1240~1500RPM to suit.

Power supply unit located at the lower part of the chassis, and it can get the cool air from the bottom of the chassis. Ideal for keep power supply in lower temperature to keep in best output performance, also keep the components cold to extend the life cycle.

There are opening for water tubes on rear panel. Ideal for user who would like to fit liquid cooling system into PC-A7010.

User Frinedly:

The top cover can be remove for service or upgrade. There are alot of optional kit for user to upgrade.
Hard Disk mounted with latest Anti-Vibration System. No Tool required! Simply using thumb screws secure the rubber rings on the hard disk, and slide into the HDD rack.

The Motherboard tray is removable. User just release two fixing thumb screws at the rear, and the motherboard tray can be released. User can put the motherboard tray on the table top, and no more working in the narrow space .

Front panel fitted with easy attach kit, it can remove without tool, user can service the air-filter or fan easier

PC-A7010 has room to hold up to two 220mm long power supply units. The power supply mounted on a fixing plate, simply slide out the power supply for service.

For user who has high end graphics card, PC-A7010 fitted a graphics card holder to support the graphics card, and hold it in position. To avoid it from bending . There are two sizes of holders include in the accessories box. User can use the right size to fit their need.

The I/O ports located on the top of the case for easy access. Due to today's requirement, Lian Li designer add extra USB ports, and provide new interface, now PC-A7010 has total four USB 2.0 ports, and E-SATA connectors. There are also a dust -free cover to protect the I/O ports.