Lian Li (PC-V352A, PC-V352-A) HTPC/Desktop Computer PC Case with USB 3.0 Ports

Lian Li (PC-V352-A) HTPC/Desktop Computer PC Case with USB 3.0 Ports - SILVER, Accept Micro ATX M/B

Motherboard tray can be easy slide out of the chassis, user don't need to work in a narrow space inside the case.
PC-V352 is designed for your living room, it can fit a standard Micro ATX system into this tiny chassis and a standard ATX P/S2 power supply, still has good performance of thermal system.

Silent Performace:

The fans are mounted with Lian Li’s anti-vibration fan mounting system; the rubber ring grommet absorbs the vibration, keeping the case silent.
TYR PC-V352 features Lian Li patented Anti-virbation HDD cage, which allow user to fit three of 3.5 HDDs. It is easy to use, no tool required, simply using the special thrumb screw to secure the anti-vibration rubber ring to the HDD, and slide the HDD into the cage.
Lian L is equipped EMI spring at the bottom of the hard disk rack, so that keep quiet and shock-absorbing hard disk, and hard drive rack is still easy to install and remove.
The aluminum case stand with rubber pad to absorb the vibration to reduce the noise.
Lian Li designer looks into detail, PC-V352 has equipped anti-vibration kit on the chassis, to absorb the noise. Like the EMI spring, it absorb the vibration, and the moyherboard tray still easy to slide out.

The power supply has rubber pads for both insulation and support and also secure the PSU without scratching the painted surface.

Creative Thermal Solutions:

Aluminum can remove heat four times faster than steel, therefore PC-V352's aluminum alloy chassis can help�system to stay in cooler temperature, to�extend the componet's lifecycle.
PC-V352 equipped two 120mm intake fans, at the front to bring the cold air into the system. The fans cover the whole motherboard, and they can remove the heat fast.
In the upper zone, there is a 80mm exhaust fan at the rear to draw the hot air out, and improve the air flow inside the chassis.
The PCI bracket with vent holes for extra cooling to PCI add-on cards.
On the back of case has fitted a 3-Speed fan controller, user can adjust the fan speed to get the best balance between�silent and cooling.
The openings on the bottom of the PSU cage, using PSU ' fan to draw the hot air out, and improve the air flow inside the chassis.

User Frinedly:

Multi-media port connectors follow international specification standards, with one connector for easy installation. New USB3.0 ports x 2, e-SATA, Audio supports HD Audio or AC97 Audio. The dual design is for better compatibility options. Depending on your need, all I/O ports can be installed on the right or left side of the case, allow for easy access.
There is a PCI Bracket allow user to connect USB3.0 cable from I/O port to Motherboard.
There is a modular 5.25 bay cage, simple un-do the thumb screw, and silde the cage out, user can choose where their optical facing to, there are opening for 5.25 at the right and left hand side of the case.
There is a modular HDD cage, simple un-do the thumb screw, and silde the HDD cage out, mount the HDD with anti-vibration kit.

There are special opennings for cable to pass through different zones, and the openning has fitted with protection kit to avoid sharp edge damage user's hand or cut the wires.

Where air enter the chassis, there is a need for an air filter to hold the dust. In the front, fans with washable air filters, it can easy remove, no tool required, and it is recyclable.