IPC Queen (OK350AU2S) Silver eCOMBO SATA/PATA To eSATA/USB 2.0 External HDD Enclosure -3.5 inches

The eCombo 3.5 inches SATA/PATA to eSATA/USB 2.0 Hard Drive Enclosure is the best solution for users who want to upgrade their hard disk from PATA (Parallel ATA) to the newest HDD technology- SATA (Serial ATA) interface and still able to use the same USB 2.0 interface. Both USB and eSATA interface will be included in the eCombo enclosure. While using the SATA HDD then just a slide switch away you will have two benefits: a> Most popular and convenient USB interface to your hard disk and b> The best data access performance without any data interface change delay. The eCombo external enclosure converts any 3.5 inches PATA/SATA hard disk drive into a 480M bits/sec Hi-Speed USB 2.0 or direct connects the SATA HDD and gets 1.5G bits/sec(SATA) or 3.0G bits/sec(SATAII, Phase II) performance (The computer needs to have eSATA external ports)

• Ideal for 3.5 inches PATA and SATA HDD
• Fanless design
• One USB 2.0 port, one SATA port
• Converts 3.5 inches PATA/SATA hard disk drives into Hi-Speed USB 2.0 or SATA to eSATA external hard drives
• Support all 3.5 inches PATA/SATA hard disk drives of any capacity
• Hi-Speed USB 2.0 transfer rates up to 480M bits/sec
• SATA transfer rates up to 1.50 bits/sec or 3.0G bits/sec (depend on the SATA HDD type)
• Plugs & Plays and hot-swappable
• Interfaces: Serial ATA , USB 1.1 / 2.0
• Compliance with GEN1i, and GEN1m of SERIAL ATA II electrical specification 1.0
• Support SATA II asynchronous signal recovery ( hot plug ) feature.
• Support 480Mbps high speed (HS) and 12Mbps full speed USB operation
• LED indicator: front-power, HDD activity
• Case Material: Aluminum
• Weight: 3.0 lbs / 1.36 Kg
• Dimensions: 210.5 mm x 119.5 mm x 38.5 mm

Box Content:

• 1x e combo 3.5 PATA/SATA HDD to eSATA/USB2.0 external Enclosure
• 1x 3 feet A-male to B- male USB2.0 cable
• 1x 3 feet eSATA cable
• User manual
• Mounting screws
• Driver CD(Win 98 only)
• AC power adapter with power cord
• Clear mounting stand

Environments:

• Power requirements: 110-220 VAC, 50-60 HZ, 12V/2A, 5V/2A
• Operating temperature: 5 to 50 C
• Storage temperature: -40 to 70 C
• Operating humidity: 5 - 90%, non-condensing

Rrquirements:

For PC

• Serial ATA Windows 98SE/ME/2000/XP/Vista
• USB 2.0 Windows 98SE/ME/2000/XP/Vista
• USB 1.1 Windows 98SE/ME/2000/XP/Vista
• Computer must have proper port or PCI card

For MAC

• USB 2.0 Mac OS 10.2 or higher
• USB 1.1 Mac OS 9.1 or higher
• Must update the USB extension to v1.41 or higher between mac OS 8.6 and Mac OS 9.04)
• Computer must have proper port or PCI card